Engineering Design - Freelance Contractors & Consultants
1,865 Contractors / Freelancers / Consultants:
= Freelancer has their own limited company- Process Engineer, Ellesmere Port, Cheshire, UKChartered Chemical Engineer with 20 years experience. Available for reliable & flexible ad-hoc process consultancy. Services include process design, advice on equipment selection (e.g. pumps & heat exchangers), pressure relief studies and hydraulic calculations. Can offer dynamic simulation services using specialist computer software for process control problems and safety analysis (e.g. SIL).
- Senior Project Installation Engineer & Client Rep, Aberdeen, Aberdeenshire, UKSenior Project,Construction, Installation Engineer & Client Representative [On & Offshore]
- Consultant, New Malden, Surrey, UKConsulting, energy audit, process design, feasibility sudies of oil and gas facilities, troubleshooting, power generation, waste heat boilers, PID review and development, Hazops,
- CAD DRAUGHTSMAN, Hull, East Riding Of Yorkshire, UKExperienced CAD draughtsman, excellent AutoCAD skills, 16 years experience, broad engineering background.
- Mechanical Design Engineer, Taunton, Somerset, UKMechanical Design Engineer, specialising in HVAC & Piping design using AutOCAD, AUTOCAD MEP, REVIT MEP, PDMS, HEVACOMP, etc
- Piping and Static Equipments Engg, London1 Plant Piping Layout and Piping Engg Autocad ( PDMS on request ).
2 Estimation and Bill of Materials.
3 PMS and VMS and Engineering.
4 Design of Static Equipment.
5 Specific request from Client.
- Senior Engineer, HertfordshirePipeline Engineer Subsea, 25 yrs project & design experience in the Offshore Oil/Gas Industry
- Electrical Energy Consultant, Greater London, UKInternational and multilingual Energy Consultant (DipDEA, BSc in El.Engineering)
- Control Systems Engineer, Ormskirk, Lancashire, UKGas Turbine Control Systems
- Chemical Engineering Consultant , Sheffield, UKChemical engineer consultant within the energy industry. Providing performance improvement strategy to oil, gas and power generation ancillaries to attain optimum performance and environmental manage..
- Trainee Facility Engineer, Aberdeen, Aberdeenshire, UKA self-motivated Structural Engineer who has a rare ability to work under pressure in a challenging and multicultural environment. Ambitious to promote the achievement of organizational objectives.
- CAD DESIGNER/DESIGN ENGINEER/ PRO E WILDFIRE, Middlesex, UKI am currently looking for other project that requires design engineer 3D CAD models , 2D draughting, specialist in Pro Engineer Wildfire. I am open to new opportunities as I like facing new challenge..
- CAD Designer, Preston, Lancashire, UKA competent AutoCAD and AutoCAD Architectural user, and a basic user of 3D Max, CAD-Duct, NAVIS Works, PDMS and MiCAD.
Fully conversant in the Microsoft Office Package
- Freelance Highway Design/Traffic Engineer, Liverpool, UKHighway Design Engineer
Responsible for implementing the rolling programme to upgrade the Primary Route Network (PRN) within Salford, to comply with the 25-year renewal programme.
Of the 7 PRN Scheme..
- Well Engineer / Drilling Engineer10 yrs experience in well engineering offshore, onshore, well design & asset valuation (Shell, BG, Petroceltic, Schlumberger and freelance). Cambridge engineering degree and Rotterdam University MBA.
- Pressure Vessel and Heat Exchanger engineer, Aberdeen, Aberdeenshire, UKSenior Mechanical design engineer with over 12 years experience in design of Pressure Vessels, Heat exchangers ( thermal and mechanical deisgn) as per ASME, PD5500, TEMA, API, and PED 97/23/EC
- Quantity Surveyor , Brighton, East Sussex, UKExperienced Quantity Surveyor/ Project Manager, BEng, MSc, CIOB, RICS
- Senior Naval Architect ConsultantA highly skilled Naval Architect with International experience, performing Project Coordination, Consultancy Engineering, Naval & Offshore Engineering Analyses for Oil&Gas and Marine industries.
- 3D Piping / Mechanical / Modeler, Middlesbrough, North Yorkshire, UKTime Served Piping / Mechanical 3D Designer with over 25 years experience.
Together with my own CAD hardware and licensed AutoCAD, MicroStation, Solidworks and Inventor, software.
- Contract Senior Mechanical Design Engineer, New ZealandMechanical Engineering - Mechanical Design - Project Engineering - Oil and Gas - Subsea - Aeronautical - Marine
- Civil / Structural Engineer Civil/ Structural engineer Four years of experience in design and technical sector. Experienced in all aspects of Structural Steelwork, concrete and timber ranging from design to draughting and from ..
- Director - Design Engineering, Birmingham, West Midlands, UKMy experience is the development, thermal & mechanical design & manufacture of all types of heat exchangers from automotive radiators to large scale Coded process plant incl. brazed aluminium coolers
- Electrical Design Engineer, Belfast, County Down, UKElectrical Engineer. Chartered Engineer registered with the Engineering Council (C Eng). Member of the Institute of Engineering and Technology (MIET) formerly IEE.
- Lead Civil Engineer / Project Manager, Rotherham, South Yorkshire, UKCivil, Structural Engineer, Project Manager with over 35 yrs multi-discipline experience & knowledge. IOSH Managing Safely certificated.
- International Welding Engineer, LithuaniaWelding Engineering, Procedures development, Non destructive testing. Manufacturing of metal constructions, Outsourcing to Lower cost countries. Preparation of manufacturing, CE marking etc.
- Senior Process Engineer, Gloucester, Gloucestershire, UKProcess Engineering Design /Commissioning / Project Management / Product Support / Process Support /
- CAD Designer, Westerham, Kent, UKi am a skilled AutoCAD/Microstation designer with experience working on Conecptual, FEED and Detailed design of both onshore and offshore installations. i have worked within the Process & Safety disc..
- Piping Design & Stress Engineer, Camberley, Hampshire, UKPipe Stress Engineering, Material engineering, Piping design, layouts, calculations and support designing.
- Energy Consultant, Chelmsford, Essex, UKA Chartered Engineer and an accredited Carbon Trust Consultant with 25 years experience in the Built Environment. Planning Energy Reports, Design Studies for Renewables, District Heating and CHP.
- Engineer and business consultant, Oxfordshire, UKA mechanical engineer with a strong business drive and knowledge. Interested in all new technologies, especially within the energy industry, and bringing them to market
- Space systems consultant, New Malden, Surrey, UKAn experienced aerospace consultant with extensive network in UK and international space agencies and industry, available for technical project management, engineering design as well as strategy.
- Commissioning Engineer, Grangemouth, Stirlingshire, UKCommission
- Piping/Mechanical Designer, Leicestershire, UKPiping/Mechanical Designer with 11 years experience on Oil & Gas jobs in the UK and abroad, primarily using 3D PDS and Microstation. 3D modeling of pipework and equipment, plant layout, P&ID and Iso g..
- Senior Piping Designer, Rochdale, Lancashire, UKSenior Piping Designer with wide experience in oil; chemical; sewage and water treatment; and paper making industries. Conversant with BS 5750 & ISO 9001 working practices. Proficient in use of PDMS 3..
- Lead Electrical Controls and Instrumentation, Middlesbrough, Cleveland, UKAn experienced and practical Functional Safety Engineer with experience through all phases of the safety lifecycle, from HAZID, HAZOP, SIL Assignment and LOPA studies, through Safety Requirements Spe..
- Planning Engineer, Inverurie, Aberdeenshire, UKOver thirty five years in engineering, more than twenty five of which have been involved with various aspects of Project Management and Control.
- Senior Principal Engineer /Senior Project Engineer, Manchester, Greater Manchester, UKOver 27+ years experience in Mechanical & Machinery Engineering of large E& P projects with reputable international "blue chip" operating and contracting companies predominantly gained in the oil & ga..
- designer, Ashby-De-La-Zouch, Leicestershire, UKAn outgoing and proactive individual with considerable experience within the engineering industry, who easily assimilates new information. My experience has concentrated on the design of a wide range ..
Page 1 of 47 Engineering Design - Contractors, Freelancers, Consultants & Candidates:
