Control - Freelance Contractors & Consultants
1,916 Contractors / Freelancers / Consultants:
- Engineering Contractor, Fordingbridge, Hampshire, UKAs a Chartered Mechanical Engineer experienced across many industries, I launched my Business in 2007 to provide a professional level of technical support which is flexible and responsive to Client needs. I offer: design validation, calculations, Project and ISO9001 Quality management, technical documentation, liaison, and business system analysis. Contracts serviced online or on site as required
- Consultant , Crawley, West Sussex, UKExperienced and successful CONSULTANT with a wide range of technical, commercial and management experience acquired over 16 years working in radio planning and spectrum management. Fulfilled roles of operational, product and sales Director and as a technical consultant in radio, spectrum management and many research projects. Author of one book on radio planning and writing a second.
- Project Manager, Eastbourne, East Sussex, UKProject Manager LUL experience Railway construction and maintenance
- Consulting & Service Design , Antrim, Co.antrim, UKService Design CAD 2D/3D turn-key projects, multidiscipline (piping,supports,mech .layout,equipment) B.O.M.
- Freelance Mechanical Design Engineer, Gillingham, Kent, UKA qualified hardworking CAD Design Engineer seeking challenging design projects which will utilize extensive knowledge in design and development of product prototypes for commercial and industrial use
- Lean - Six Sigma Black Belt, Cambridge, Cambridgeshire, UKExperienced Six Sigma change agent, certified Black Belt & Master Black Belt. Proven ability to deliver against objectives, communicates at all levels. Strong team player, experienced leader.
- Freelance Senior Design Engineer, West Yorkshire, UKMechanical and design engineering with 3D Visualisation knowledge.
- Quality Manager, Amersham, Buckinghamshire, UKI am an experienced Quality Manager cum Auditor, especially in systems development, maintenance and operations. I am highly qualified, am multi-disciplined. I had started work as a software engineer.
- Project Manager / Event Planner, London, Greater London, UKHard-working, efficient all-rounder especially in delivering projects within scope, time and cost, whether it be a research project for a charity or planning a corporate event.
- Quality Engineer, Ormskirk, Lancashire, UKI have worked in a Quality Engineering role in the following areas, Project, Design,Manufacturing, Supplier, and Customer support in a variety of industries using varrious quality techniques.
- CAD Design Draughtsman, Oldbury, West Midlands, UKLooking for any CAD role in any discipline.
- Business Management Consultant, Birmingham, UKProven practitioner looking to partner with all types of organisations. Develops leaders and communicates the organisation's vision. My clients are my priority and are treated with professionalism.
- Product/ Mechanical Design engineer, Leeds, West Yorkshire, UKI am a Product/ mechanical design engineer of 3 years experience within varied industries such as the medical, automotive and machine building using programs such as Solid works and AutoCAD.
- QHSE/ QA/ QUALITY/ ENVIRONMENTAL/ AUDIT SPECIALIST, Manchester, Greater Manchester, UK11 years experience implementing & maintaining ISO9001:2008, ISO/TS16949:2002, & ISO14001:2004 systems. Automotive specialist utilising PPAP, APQP, FMEA, SPC, MSA, 5why, 5S, 8D. Qualified Lead Auditor
- Quality Project Outsourcing Manager, Malpas, Cheshire, UKProfessional Leader from UK Manufacturing able to operate at Engineer to Senior Stratergist level with Transferable skills in Human Resource Management, Crisis Recovery, Six Sigma Budgetary, Quality S..
- Director, Plymouth, Devon, UKExperienced engineer in developement of medical device automated equipment
- Pharmaceutical Project and Validation Engineering, ClevedonPharmaceutical Project Engineering and/or validation work. I have experiance in C&I, project engineering, validation and computer validation. Experianced in both equipment and utilities/facilities
- Mechanical Design Engineer, Dublin• Skilled product and equipment designer, using stress analysis and latest 3D-CAD software to create component specifications, parametric models and production drawings. • Experienced in Engineering ..
- Contracts / Project Manager, Goole, North Yorkshire, UKFreelance Management Consultant, experienced in Construction, Power, Water and Renewable Energy Sectors. Mechanical and Electrical qualified, experience gained from Project Manager to Director level.
- Consultant Firmware Engineer, Berks, UKA talented electronic engineer skilled in DSP, firmware, electronics and FPGA design.
- Structural Engineer, UKAccomplished near Chartered Structural Engineer with six years experience working with a London based, engineering consultancy specialising in building structures.
- Site Agent; Site Engineer, Holyhead, UKExperienced Site Engineer/Agent. Line & Level Control, Groundwork Management. RC & Steel Framed Structures. Deep Drainage. Water Infrastructure Projects. Tunnelling & Shaft sinking. Roads & Bridges.
- FMEA ENGINEER, Ellesmere Port, Cheshire, UKA professional engineer with extensive mechanical experience of both the automotive and general manufacturing industries. Proven leadership skills, with dedication to the highest quality standards.
- Interim Programme Manager, Saffron Walden, Essex, UKAn accomplished business and technical manager, with postgraduate qualifications in management and engineering, has delivered major broadcast, telecommunications systems projects, worldwide.
- Project Manager, Poole, Dorset, UKI am a very experienced Construction Project Manager with a Masters Degree in Project Management. I specialise in Construction Management on Hospitality or Healthcare projects particularly overseas.
- Instrument TechnicianInstrumentation - Engineer - Electrical Commissioning/Calibration - Fire/Gas Compressors - Clearing Punchlists
- Quality Engineer, Coventry, W.midlands, UKI am a very experienced Quality Engineer (AIQA).
- Quality Consultant, Wolverhampton, West Midlands, UKExperienced Quality professional with a thorough understanding of the manufacturing environment and management systems: TS16949, ISO9001:2000, ISO14001.
- Electrical Engineer, Derby, Derbyshire, UKMulti skilled well expereinced Electrical Engineer. Self motivated problem solver
- Embedded C programmer, Watford, Hertfordshire, UKWell experienced Embedded C programmer. Skilled in designing software from scratch using UML tools but also strong on maintenance programming. A background in hardware strengthens embedded skills.
- Quality Manager/Engineer, Littlehampton, W Sussex, UKWith over 40 ys of QA/QC in engineering - Aviation, Defence, Medical, and F1. I thrive in challenging working environments. I also liaise effectively with colleagues, customers & suppliers.
- Mechanic, Lincoln, Lincolnshire, UKMilitary contracts or Automotive jobs
- Purchasing / Procurement Manager, Derby, Derbyshire, UKA competent and organised Global Purchasing Professional from within manufacturing industries.
- Seller 290797, Sheffield, South Yorkshire, UKA Chartered Chemical Engineer specialising in Process Engineering with experience in project management, design, troubleshooting and commissioning within the food, pharmaceutical, chemical industries.
- PROJECT MANAGER, Lydney, Glos, UKAn experienced, resourceful, successful and pro-active Project Managing professional, with a Project Management based degree and experience of managing projects over a wide range of industries includi..
- Seller 278884, LondonDesign Draughtsman / Project Engineer were I can apply over 20 years experience in the engineering industry commencing with a tool & die maker apprenticeship (Tool room & Design office).
- Mechanical Design Engineer/Draughtsman, Chichester, West Sussex, UKAn enthusiastic and hardworking Mechanical Design Engineer with a varied and diverse background within low to high volume manufacturing environments covering; electrical, instrumentation and audio equ..
- Mechanical Engineer, Wakefield, UKDesign engineer, Production Engineer, Trainer, HR, Recruitment, Works Manager, Project engineering
- Quality Engineer, Coventry, W. Midlands, UKI am a Contract Quality Engineer, with over 20 yease experiance in the Automotive sector, specilising in NPI, and QMS
Page 1 of 48 Control - Contractor, Freelancer & Consultant Sellers:
