Freelance Technical Integrity Auditor (Instruments). Montrose, Angus, UK
Experienced with the following systems and packages: PMIC; IMIS; Excel2003; WordPerfect, Word2003; AmiPro; Lotus 1-2-3; Networking; Freelance Graphics; Quicken; Visio; Access; Publisher; Qbasic; Visual Basic
| Rating: | Unrated (New) |
| Hourly Rate / Cost: | £30.56 per hour |
| Daily Rate / Cost: | £244.44 per day |
| Available From: | Now |
| Seller ID: | 297445 |
CV (Curriculum Vitae) / Résumé
QUALIFICATIONS: Higher National Certificate. Union of Educational Institutes Engineering Certificate.
TRAINING:GEC-Elliot Automation: Industrial Instrumentation Training. (Metering / Process Measurement and Control / Telemetry etc.).
CEGB Pembroke Power Station: Chemical Handling; Industrial Weighing; Process Controls; First Aid; Breathing Air Equipment.
Aramco: Honeywell TDC 2000; Petrochemical Plant Permit to Work Systems. Saudi Arabian Defensive Driving.
Robert Gordon Institute of Technology: Survival, Firefighting, First Aid certification. Offshore medical and dental certification.
Shell UK Exploration and Production: Integrated Maintenance Information System (IMIS) Course; OPRIS Course; Platform Column Entry Certificate; MAPS Card Holder.
Marathon Oil UK Limited: Hydraulic Shutdown Systems; Computerised Crane Instrumentation; Communication in Management; First Aid; Production Maintenance Information Control; Sub Sea Systems.
Morgan Moore Engineering: Quality Management Instruction (QMI). ISO9000 Lead Assessor's course.
GENERAL: Experienced with the following systems and packages: PMIC; IMIS; Excel95/97; WordPerfect, Word95/97; AmiPro; Lotus 1-2-3; Networking; Freelance Graphics; Quicken; Visio; Access; Publisher; Qbasic; Visual Basic. Clean British and Texas driving licenses. Current British Passport.
Employment History
(Mar 1998 to Jul 1999)
Technical Integrity Auditor (Instruments).
AberdeenCarrying out independent third-party audits on all Shell UK Brent Field platforms. (Offshore). References made to all relevant ISO9001 based Shell Codes of Practice. Accountable to Shell Senior Inspection Engineer. Liaised with all levels of offshore / onshore management
(Jan 1998 to Mar 1998)
Valve Engineer
.. Mobil / AMEC Project. Temporary position. Assisting Engineering Manager. Liaison with suppliers, client, platforms, workshops, purchasers. Dealt with all aspects concerning valve engineering management, queries, datasheets, spreadsheets, specifications etc.
(Aug 1996 to Feb 1997)
Instrument Supervisor
Qatar General Petroleum Corporation, Doha Company representative. Liaised between client, inspection and contractor at all levels of management. Accountable to the Project Engineer for supervision of multinational, multi-discipline workforce during shutdown of offshore oil and gas fields and installation of equipment associated with remote telemetry units. Onboard work vessels, production platforms and jackets. Also onshore activities.
(May 1995 to Feb 1996)
Instrument Engineer
Trafalgar John Brown Engineering & Construction Ltd, AberdeenBHP Petroleum - Ravenspurn Complex. Authoring / compiling / checking of design workpacks for platform instrumentation upgrades. Accountable to John Brown Engineering Senior Instrument Design Engineer. Liaison with client - carried out the compilation / updating of the Ravenspurn Complex instrumentation database (Reference documents: BS 5750 / ISO 9001, BS 5345)
(Mar 1994 to Feb 1995)
Instrument Support Engineer
Morgan Moore Engineering Ltd, AberdeenShell Brent Field Inspection - Authoring routines / procedures for Cold Logic, Safeguarding ESD and Safety Performance Indicator activities. Close liaison with client focal points. Accountable to Morgan Moore Engineering Manager. (Reference documents: BS 5750 / ISO 9001 / Code of Practice 5.001.)
(May 1992 to Apr 1993)
Project Manager
Strategic Maintenance Engineering, Aberdeen
Shell Northern Field. 'Ex' Certified Equipment Project. Review of PMR allocations and Integrated Maintenance Information System (IMIS) error correction programme. (Reference documents BS 5345). Wrote job Specification / Scope of Work. Senior Instrument Project Engineer. Shell Brent Field. Acting as Inspection Department Focal Point for review / writing of Emergency Shutdown Valve (ESDV) Inhibited Trip Testing programme. (Reference documents 1989/SI 1029).
(Mar 1992 to May 1992)
Instrument Discipline Engineer.
John Brown Engineering & Construction Ltd, AberdeenChevron UK Limited. Completion of authoring for Ninian Field, Staffa Subsea system. Involved full description of all periodic activities, test records, recommended equipment lists etc. and reference to Department of Energy documentation Standard Instructions 1989/1029
(Oct 1991 to Mar 1992)
Instrument Systems Representative
Elf Enterprise Caledonia, Aberdeen Responsible to Deputy Maintenance Systems Co-ordinator for review of Periodic Maintenance Routines Technical Procedures being authored by Offshore Design Limited for Piper Bravo. Process, Fire & Gas, HVAC etc. Scheduling Work Packs for Production, Gas Compression and Accommodation Modules. (Reference SI 1029/BS 5345/BS 5750).
(Apr 1990 to Aug 1991)
Instrument / Electrical Project Engineer.
Shell UK Exploration and Production, Aberdeen. Brent Field Emergency Shutdown Valve (ESDV) project. Liaison between various design and supply vendors, onshore and offshore Construction Departments, Discipline Engineers etc. Responsible for activities of design / as - built draughtsman. Involving logic, hydraulic power, pneumatic and electronic equipment, Fire & Gas etc. Assisted with on-site training / writing of test procedures of platform operators. (Reference SI 1989 / 1029).
(Nov 1985 to Apr 1990)
Instrument Maintenance Engineer.
Marathon Oil UK Ltd, Aberdeen. Onshore support of Brae Alpha and Bravo Instrument Maintenance Departments. Duties included raising and implementing of Work Orders, Job packs, Periodic Maintenance Routines / Procedures. Numerous occasional offshore visits. Involved with instrumentation on platform Firewater Systems, Cranes, Flow Metering, Fire & Gas, Utilities etc. MIPEG, Mather & Platt, Wormald, Introl, Spectratek, Taylor, Honeywell TDC 2000 equipment. Carried out preparation work for annual shutdowns, i.e. material and job pack requirements. (Reference SI 1989 / 1029 / BS 5345
Employment History
Aug 1985 - Nov 1985. Instrumentation Commissioning / Planning Engineer. Esso Oil Company, Flexicoker Project, Rotterdam Refinery, Netherlands. Duties included raising Work Orders and writing procedures for modification work on Fire & Gas systems, audio / visual alarm systems, cable termination control room refurbishment work for installation of Honeywell TDC 2000 Field and Control Room equipment. Reported to Project Manager. Responsible for day-to-day activities of Commissioning Technicians.
Feb 1984 - Aug 1985. Instrument Contracts Engineer. Shell UK Exploration and Production, Aberdeen. Provided technical support to offshore Instrument Maintenance Departments on Cormorant Alpha, Cormorant North and Alpha platforms. Duties included day-to-day handling of routine maintenance carried out offshore, monitoring activities, providing material support, work packs and shutdown preparation work.
Mar 1982 - Dec 1983. Instrument Construction Engineer. Shell UK Exploration and Production, Brent Field, East of Shetland. Brent Charlie platform. Reported to platform Resident Engineer. Involved with Installation Improvement Programme (IIP) work. Installation and pre-Commissioning all new instrumentation. Supervision of Instrument Foremen, Fitters, Calibration and Commissioning Technicians and Panel Wiremen. Primarily of a modification / shutdown nature. Texas, Daniels, Spectratek, Fisher Taylor. Water injection.
Feb 1981 - Mar 1982. Instrument Commissioning Engineer. Aramco Oil Company, Yanbu Gas Plant, Saudi Arabia. Field Commissioning of Honeywell TDC 2000 instrumentation on Natural Gas Liquids (NGL) Plant. Responsible to Engineering Team Leader for witnessing and acceptance work.
July 1979 - Oct 1980. Instrument Contracts Engineer. Amoco Oil Refinery, Milford Haven, Wales. Writing Work Specifications for changeover from Foxboro to Honeywell TDC 2000 control system. Reported to Amoco Senior Instrument Maintenance Engineer.
Dec 1976 - Mar 1979. Senior Electronic Specialist (Instrument Technician). Arabian - American Oil Company, Saudi Arabia. Maintenance and Commissioning of Gas Compression, Water Injection, Gas Oil Separator Plant (GOSP) and pipeline instrumentation. Fisher, Taylor, Rotork.
Maintenance Engineer. Ras Tanura Refinery - Test & Inspection Planning on Asphalt Plant shutdown and as Staff Engineer, Services Division. Responsible to Superintendent for progress reporting, budgeting etc.
Mar 1973 - Dec 1976. Commissioning Engineer / Instrument Mechanic. CEGB Pembroke Power Station, Wales. Installation, Commissioning and Maintenance of Elliot Automation automatic boiler control systems, temperature, flow, pressure, measurement and control.
Mar 1968 - Mar 1973. Instrument Service Technician. GEC-Elliot Automation, Lewisham, SE13, London. Potteries, Brickworks, Steelworks, Bakeries, Power Stations. Serviced, Maintained and Commissioned GEC-Elliot Process Automation Instrumentation equipment including temperature, pressure, level, auto boiler controls etc.
Mar 1965 - Mar 1968. Instrument Technician. British Ceramic Research Association, Stoke-on-Trent, Staffs. Assistant to Workshop Scientific Officer. Responsible for calibration of temperature control and test equipment. Worked on high temperature kiln design and commissioning. Involved with development of research instruments and equipment for the ceramics industry.
Mar 1957 - Mar 1965. Technician. University Workshops, Keele, Staffordshire.
Reported to Workshop Superintendent. Involved with development of research instrumentation for Physics, Chemistry, Communications and Geography laboratories.
Categories & Freelance Skills
Engineering & Technical
Categories
Skills
- Access (Engineering - Software Skills - Microsoft)
- Assistant Project Engineer (Engineering - Job Role)
- Control & Instrumentation (Engineering - Experience)
- Draughting (Engineering - Experience)
- Education Level (Engineering)
- English (Engineering - Languages)
- Excel (Engineering - Software Skills - Microsoft)
- HNC Qualified (Engineering - Education Level)
- Instrument Engineer (Engineering - Job Role)
- Languages (Engineering)
- Maintenance Project Engineer (Engineering - Job Role)
- Microsoft (Engineering - Software Skills)
- P&ID's (Engineering - Experience)
- Personal Computers (Engineering - Experience)
- Project Engineer (Engineering - Job Role)
- Refinery (Engineering - Experience)
- Shutdown Planning (Engineering - Experience)
- Software Skills (Engineering)
- Visio (Engineering - Software Skills)
- Word (Engineering - Software Skills - Microsoft)
- Writing Procedures (Engineering - Experience)

