Printer friendly ]Freelance Data Cabling Engineer East Boldon, Tyne And Wear, UK
Data cabling engineer, cat6 cat 5e, RF, VSAT, Wireless, Fibre, CSCS,IPAF, First Aider appointed person, BTEC Diploma in Telecoms, City & Guilds 3667 fibre and copper, Confined space, NRSWA Supervisor.
| Rating: | Unrated (New) |
| Hourly Rate / Cost: | £18.18 per hour (ex. VAT) |
| Daily Rate / Cost: | £145.41 per day (ex. VAT) |
| Available From: | Now |
| Candidate ID: | 353057 |
About QR Codes
people4 is the first employment business to generate QR codes.
Now users with a smart-phone scanning app can store this information - including job title, brief description and a link to this page - to use when ready to shortlist or set up a contract.
For more information, see the wikipedia article on QR Codes
CV | 
SkillsCV (Curriculum Vitae) / Résumé
Key Skills / Experience
Data copper cabling
• Familiar with various containment-Mini/dado trunking-basket
• LAN technology cabling – terminating UTP cat 5/6 to rj45 – IDC and110
• Terminating various patch panels – pressac, amp, krone and fusion
• Test networks using the fluke DSP series tester and download results
• Installation standards EN50173/74 – TIA/EIA T568A/B - test EN50346
Telecoms copper cabling
• Terminate and test CW1308 multipair OG cable. UG CW1108 –Krone 237a/HD MCC
• Terminate into various enclosures – i.e. Tyco using scotch locks jellies
• Terminate CW1308 multipair to patch panels – analogue and digital voice to data networks
• Jointing methods – IDC – 110 – SID – inserter 8a – scotch locks
• Dress cw1308 cable for wrapping-50/100pair primary and secondary colors
• Gun wrapping using OK PTX wire wrap gun awg 22/24 and 3G and 4E
Optical Fibre
• Pulling Fibre Optic cable internal and external
• Single mode and Multimode optical fibre
• Install and test multimode LAN networks – visible light source- ILM – OTDR
• Assemble SC and ST connectors/patch cords using the glue and polish, epoxy and cold cure
• Worked with Fujicura Fitel fusion splices – single & multimode
• OTDR testing after network installation
• Installed single mode networks – BT Pirelli enclosures
• Testing to en50173 spec – connectors, splice and cable
Other skills
• Technical Support for Windows XP and Windows compatible software
• Hardware installation, system support and maintenance
• Supervisory and team leading skills
• Devising and implementing training programs
• Knowledgeable in risk assessment, quality and health and safety procedures
2011 EDF Power Station Clearance CN90602356 and expiry date is 07/04/2014
Qualifications
2011 - CSCS card (working at heights) 2011 - IPAF 3a/3b
2011 - City & Guilds 3667-101/104/204 Copper Cabling
2011 - City & Guilds 3667-102/202 Fibre Optic cabling 2011 - BTEC Diploma Telecom and data
2010 - First Aid for Work (Appointed Person) 2010 - Confined Space City & Guilds Level 3)
2009 - CCNSG Safety Passport ECITB 2009 - NRSWA Supervisor City & Guilds
2009 - NVQ2 Construction & Driving Assessment 2006 - 2008 - Microsoft MCP and MCDST
2006 - OCR Qualifications ICT Level 2 – 3 2005 – 2006 – Cisco CCNA Semesters 1-4
Employment History
(Feb 2012 to 2012)
Data Cabling Engineer
INTO NEWCASTLE(Newcastle University) Feb 2012 – PresentInstalling a cat 6 voice over data Network to 2 academic buildings and 3 accommodation buildings over 600 rooms, installing coax cable to communal areas and connecting all the communication rooms across site with CW1308 telephone and 12 core fibre optical cable, terminating and testing, Fluke,ILM ,OTDR
(Jan 2012 to 2012)
Data Installation Engineer
Ramada Hotel, GatesheadInstalling voice and data network and coaxial cable, and full testing in new build 6 storey Hotel
(Jan 2012 to 2012)
Femto cell Install Engineer
UKInstalling trial femtocell hubs and routers on various test sites, configuring and commissioning
(Oct 2011 to 2012)
Data Cabling Engineer
Newcastle International Airport, Easington County Council, AcritasInstalling wireless, Fibre and Cat 6, Voice over data networks, commissioning and testing, Network maintenance, MACS, re-patching comms room
(Apr 2011 to 2012)
Data Cabling Engineer
Hartlepoolterminating krone patch panels and krone RJ45, Fluke testing
(Oct 2008 to 2012)
Data Cabling Engineer
North East, UKWorking on various contracts, installing voice over data networks Cat5/5e/6 and fibre and IT solutions.
See above for skills and experience.
(Jun 2011 to Nov 2011)
Data Cabling Engineer
UKHigh Tunstall College, Hartlepool
Phase 2 of CAT 6 full install and removal of old cat 5 system, cabinet and cabling, install all switches, hubs and routers and patch in new system, install 20 Pair Telco and fibre in all areas of school connecting 10 buildings to main comms room, and installing 50 pair Telco from comms room to exchange in reception, fully fluke and otdr and ilm test all points and fibre. Macs and patching
Chelmsford Magistrates courts
A new build project, installing 1200 points and running Cat6 cable in a raised floor environment, using basket and dado confinement, fully terminating the modules and patch panels fitting face plates, and then fully fluke tests all terminations as instructed by client Munro. Macs and patching server coms rooms
High Tunstall College, Hartlepool,
Cat 6 install / Full install of Cat 6, removing old cat 5 system and modules working from drawings and install new Wi-Fi and CCTV terminals using existing and replacing trucking and baskets and installing new cabinets and patch panels, pulling cables and terminating, whilst installing new trucking when old building has asbestos, and full fluke DTX testing. Installing fibre trays and splicing 12 fibre cable, to connect comms rooms across school site, working to very high standards within budget and time schedule, working to a clean as you policy and with job rotation and team work, whilst working to a system of work and following health and safety at all times.
(May 2011 to Jun 2011)
Data Cabling Engineer
Doxford Park, Regent Centre, Northern RockCat6 Cable pulling, fiber pulling, labeling, terminating krone patch panels and RJ45 mod tap testing patch leads and network, Fluke DTX testing, fault finding, working to high standards of housekeeping and H & S, working mainly on raised floor, and working from plans
Professional Qualifications
2011 EDF/clearance CN90602356 and expiry date is 07/04/2014
Qualifications
2011 - CSCS card (working at heights) 2011 - IPAF 3a/3b
2011 - City & Guilds 3667-101/104/204 Copper Cabling
2011 - City & Guilds 3667-102/202 Fibre Optic cabling 2011 - BTEC Diploma Telecom and data
2010 - First Aid for Work (Appointed Person) 2010 - Confined Space City & Guilds Level 3)
2009 - CCNSG Safety Passport ECITB 2009 - NRSWA Supervisor City & Guilds
2009 - NVQ2 Construction & Driving Assessment 2006 - 2008 - Microsoft MCP and MCDST
2006 - OCR Qualifications ICT Level 2 – 3 2005 – 2006 – Cisco CCNA Semesters 1-4
Personal Statement
I am a committed and hardworking individual who enjoys a challenge. In addition to strong communication skills, I am able to work effectively on my own and within a team environment. I can also demonstrate advanced problem-solving skills and thrive under pressure. My drive and ambition ensure I am a valuable addition to any company.
Assignment History
(This Candidate has recently been shortlisted or contracted for the following people4 assignments)
- Fibre and Cable Engineer - Ad-hoc: Fibre & cabling engineer with experience of Cisco switches and cabling required for ongoing ad-hoc work in the Newcastle area. Candidates will need to provide references and to have an initial interview. To apply for this ongoing ad-hoc job, please contact Alexis Taylor at people4business with your CV, hourly rate requirement and details of two referees. Alexis - at@people4.com - 0845 3710722
- CAT5: Installing 11 double CAT5 sockets across two floors for a care home in Newcastle.
- Data cabler: Dat cable technician to help fun CAT6 cable with Team Leader at a site near Old St Station - London The cabler must have a CSCS accreditation and PPE (hard hat, High Vis jacket, glasses, gloves & boots) otherwise he will not be allowed on site.
- Data / Cable Installers: Data cable installers CAT5 needed for nationwide shopfitting contract. Must be able to terminate cables and certificate work on completion. Out of hours working and some staying away from home. Cable / Data installers required for shop fit-out work in the following locations: 3 in London. Contract start date April 2012 just after Easter Break. 3 in Nottingham. Contract start date June 2012. 1 in Bristol.Start date to be confirmed.
Categories & Freelance Skills
Engineering & Technical
Categories
Skills
- Building Projects (Construction - Building & Construction - Experience)
- CRB (Construction - Building & Construction - Security Clearance)
- Education Level (Construction - Building & Construction)
- Industrial Construction (Construction - Building & Construction - Experience)
- New Build Construction (Construction - Building & Construction - Experience)
- Risk Assessments (Construction - Building & Construction - Experience)
- Security Clearance (Construction - Building & Construction)
- Site Engineer (Construction - Building & Construction - Job Role)
IT & Internet
Categories
Skills
- CRB (Security Clearance)
- Desktop Support (IT Support - Help Desk)
- Fast Ethernet (Networks)
- Fault Diagnosis/Fixing (IT Support - Help Desk)
- Fibre Optic (Networks)
- Gigabyte Ethernet (Networks)
- Hardware Upgrades (IT Support)
- Help Desk (IT Support)
- IP (Networks)
- Krone (Networks)
- LAN (IT Support)
- LAN (Networks)
- Laptop and Notebook (IT Support)
- Mobiles and PDAs (IT Support)
- On-site Support (IT Support)
- Operating Systems (IT Support - Help Desk)
- PC Installations (IT Support - Help Desk)
- PC Roll Outs (IT Support)
- Printers (IT Support - Help Desk)
- Remote Support (IT Support)
- Small Business (IT Support)
- Support by Telephone (IT Support)
- TCP/IP (Networks)
- VSAT (Telecommunications)
- Wireless (Networks)
- Wireless Network (IT Support)
More Candidates...